The research and development project: „Development of new LED-Light Sources for use in Plants for efficient Iddriation Systems to reduce the CO2 footprint“ is funded by the European Union from the European Regional Development Fund.
We use cookies to optimize our website and service.
IRMCOMPACT
Condensate and biofilms in evaporators lead to high germ contamination (e.g. by listeria) which is passed on to the air and thus to the product. This germ contamination is a risk for your production due to product failures and shortened minimum shelf life.
The integration of UVC lamps in and on evaporator systems reduces the germ load to a high degree.
sterisolDUCT is our range of high performance UVC modules for air disinfection. Designed for integration into new HVAC ducts as well as retrofit into existing infrastructures to solve microbiological problems or for prevention. Each module is supplied with a UVTRONIC power supply cabinet incorporating the innovative LCP2 control system, which ensures safe operation, provision of lamp status information and lamp replacement warning functions.
steriBELT® 2.0
Device for simple disinfection of surfaces in industry. Avoidance of cross-contamination, permanent reduction of the total germ count on conveyor belts as well as extension of cleaning intervals between production shifts. Quality increase or preservation as well as the possible extension of the MHD date due to low-germ packaging materials are only some of the advantages resulting from the use of the modules.
eosUV OF
High power UVC cassette in open frame design (IP 20) with convection cooling and an extremely high UVC intensity of 100 mW/cm² at a distance of 20 mm. The ballasts are located in the housing so that no separate control cabinet is required. Individual status LEDs are located on the top of the housing for visual individual lamp monitoring.
steriGATE®
The UV-C tunnel is a high-performance disinfection system for disinfecting surfaces. The system is used for disinfection, prevents contamination and keeps the germ level in the production process at a low level. Highly effective UV-C radiation kills microorganisms up to 99.99%. Whether used as an airlock for introducing goods into the high care area or as a continuous flow system for disinfecting sausage blanks before the slicing process, for example – this system offers you the highest level of safety in your production process.
UVELIOS® 500
Innovative high-power UV-C system for air disinfection of rooms.
The system is completely equipped with a light trap. This light trap makes it possible to install the system also in low rooms without any danger for the employees to be exposed to the UVC light.
The UVELIOS® 500 can also be operated in cold ambient temperatures down to 5 ° C. Service and maintenance are quick and easy.
Efficient exhaust air purification in industry and commerce by oxylight®PRO.
Odor and grease elimination of kitchen exhaust air in commercial kitchens by durchoxylight®HD.
Visit our information pages on these highly effective products – link public in new tab.
DTS®25
UV-C immersion tube system made of stainless steel for air, water and surface disinfection (hybrid system). Consisting of a high-performance UV-C lamp in a highly robust housing and a ready-to-connect ballast in a solid design. Immersion tube systems are completely watertight and can be operated under water (IP68). Pressure-tight on all sides up to 2 bar, with flange mounting up to 10 bar overpressure.
UVELIOS® 100
High-power recirculating air disinfector for effective reduction of airborne germ levels.
sterisol
Air and surface disinfection in the simplest way.
terisol emitter strips for room air and simultaneous surface disinfection.
Cost-effective and rapid reduction of germ levels in times when there are no people around by means of direct disinfection, e.g. during the night
or in closed areas and housings.
DTS®25
UV-C immersion tube system made of stainless steel for air, water and surface disinfection (hybrid system). Consisting of a high-performance UV-C lamp in a highly robust housing and a ready-to-connect ballast in a solid design. Immersion tube systems are completely watertight and can be operated under water (IP68). Pressure-tight on all sides up to 2 bar, with flange mounting up to 10 bar overpressure.
DTS®25
UV-C immersion tube system made of stainless steel for air, water and surface disinfection (hybrid system). Consisting of a high-performance UV-C lamp in a highly robust housing and a ready-to-connect ballast in solid design.
The application in the picture is the disinfection of the incoming air of a silo with perishable contents. Silos have daily flows of many cubic meters due to temperature differences in addition to the air flows due to emptying. The equipment prevents airborne contamination.
Development and production of customer-specific UV reactors & assemblies for plant manufacturers (OEM), which are integrated or marketed as the own brand of the respective OEM in small and medium series quantities in plants.
sterisol
Air and surface disinfection in the simplest way.
Sterisol radiator strips for room air and simultaneous surface disinfection.
Cost-effective and rapid reduction of germ levels during periods when people are not present by means of direct disinfection, e.g., during the night
or in closed areas and enclosures.
sterisol
Air and surface disinfection in the simplest way.
Sterisol radiator strips for room air and simultaneous surface disinfection.
Cost-effective and rapid reduction of germ levels during periods when people are not present by means of direct disinfection, e.g., during the night
or in closed areas and enclosures.
